Cork Flooring Repair

The Cork Flooring Repair will At Handyman Boston, our experienced flooring experts can provide the best Cork Flooring Repair in Boston. MA at a very reasonable price. We take pride in offering the best Cork Flooring Repair.Our Handyman Boston experts take pride in providing the best service in the Boston. MA area.

Repairing a cork floor is not a difficult task, especially if you have some home improvement experience. This section of our website was designed to help guide and educate the homeowner on how to properly repair a cork floor. One of the issues with other sites is they don’t provide information on both types of cork flooring. You will either have cork tile flooring or a floating cork floor, each requiring a different repair guide that you need to read.

How to Repair a Cork Tile Floor – This is the right cork floor repair for you if your floor is made with cork tiles. Cork tiles will generally be square and be about 12” x 12” in size, but this can vary. Cork tiles cannot be installed over a previous floor and require glue to be installed.

How to Repair a Floating Cork Floor – This is the right cork floor repair  for you if you floor is a floating cork floor. Floating cork floors will generally be plank size, with the length being far longer than the width. A floating cork floor is generally the do-it-yourself choice because it doesn’t require any glue and can be installed over an old floor.

How to Fix a Cork Floor Dent

Cork flooring is naturally resilient, so most items bounce right off of its tiles without leaving a dent. However, if you leave furniture sitting on it for an extended time, small dents may form in the surface. Once you move the furniture, the flooring may resume its regular shape. If it doesn’t, there are simple repairs to remove a cork floor dent. If the dents are large, you might want to unsnap the locking cork tiles and replace the damaged flooring tiles. For small dents, you can make the repairs directly to the tiles.

• Wipe the tiles that need repair clean with a damp sponge. Let the tile dry Locate a scrap tile or a new tile that matches your cork floor.
• Hold the scrap tile over a container to catch the dust. Rub coarse sandpaper along the edge of the tile to make dust. Stop when you have enough dust to fill the dents in the flooring.
• Mix the cork dust with a small amount of clear polyurethane, using a craft stick. The mixture should be the density of putty.
• Spread the dust and polyurethane mixture into the dents. Level it off with a clean craft stick. Allow it to dry overnight.
• Seal the repaired areas with a coat of clear polyurethane, applied with a paintbrush. Feather the polyurethane around the edge of the repair to get a good seal with the surrounding surface. Allow the polyurethane time to dry following the manufacturer’s recommendations. Temperature and humidity can affect drying time.
• Move furniture back to the area you repaired. Set protective pads under the furniture to prevent dents in the future.

Things You Will Need

• Sponge
• Scrap cork tile
• Coarse sandpaper
• Clear polyurethane
• Craft sticks
• Paintbrush
• Furniture pads

To obtain a free quote for cork flooring in Boston. MA, please don’t hesitate to contact  at Handyman Boston Floor Services.